Fabric Calculator and Framing Previewer
Use this fabric calculator to determine how much fabric you’ll need to
buy. You can experiment with different fabric thread counts and framing possibilities.
See our tutorial on using the fabric calculator.
Quick hints:
The fabric thread count is the number of threads in a linear inch of fabric. Even in metric countries,
fabric thread counts are per inch (that’s 2.54 cm). If your fabric is labelled "16-count", for example, just enter 16 as the
fabric thread count.
Stitching over 1 or 2: on aida or other coarse weaves you will normally stitch "over one" - each stitch crosses one thread. On linen and finer weaves you will normally stitch "over two".
The framing allowance is extra material that will not show after framing.
It’s there to let the framer do a good job of stretching the picture. This should be at least 3 inches.
Allow exposed borders if you also want some fabric to show between the picture and the frame, or want to
mat the picture. Usually it looks
best if the bottom border is a little larger than the top. You may like narrow side borders for a vertical
picture (longer than wide) and wide side borders for a horizontal picture. The fabric calculator shows you
how the work will look, so experiment!
The frame width does not affect the fabric calculation. It is just there so that you can tinker with
the aesthetics.
See our Tips - Fabric section for further thoughts on fabric selection and framing.
Be sure to give all sizes (except fabric thread count) in the same units, either inches or centimeters. Your fabric
requirements will be given in the same units.
The floss lasso is very useful - thank you! With the complexity of some areas on patterms, this will make a huge difference and allow much easier stitching in those areas. Not to mention a much neater finished product. Thank you so much.
